Brukte maskiner: Presser

The machine is in good technical condition, possible to test under power.

Details:
Presskraft: 63 t
Die Abmessungen des Desktop: 400x500 mm
Stößelhub: 500 mm

The machine is in good technical condition, possible to test under power.

Details:
Presskraft: 250 t
Die Abmessungen des Desktop: 1120 x 800 mm
Stößelhub: 24-180 mm

The machine is in good technical condition, possible to test under power.

Details:
Presskraft: 63 t
Die Abmessungen des Desktop: 800x630 mm
Stößelhub: 10-105 mm

Pressing force: 1400t, press-out length flat: 1500-12,000mm, recipient 1: max block diameter: 185mm, max block length: 350mm, recipient 2: max block diameter: 150mm, max block length: 580mm, max. ...

Catalog No. : 7360
Type: CLH 630 1/8
Producer: Vihorlat Snina
Made in: 1985
Characteristic:
Pressing force: 630 t

Catalog No. : 7359
Type: TL-4-250
Producer: RTS Rakovník
Made in: 1997
Characteristic:
The machine is in good condition.

good technical condition, under power

Details:
Druckleistung: 80 t
Abkantlänge: 2500 mm
Art der Pressenantrieb: Hydraulický
Maschinenabmessungen L x B x H: 2500 ...

Basisdaten:
Lagernummer: 27304
Kategorie: Einständer-Exzenterpressen
Fabrikat: EBU
Typ: SK 25
Baujahr: 1970
Steuerungsart: konventionell
Lagerort: ...

Connected load: 4kW, weight: 2t, an inspection is possible.

Ref.Nr.: INNO26505

Distance between the columns: 1100/400mm, max. ram stroke: 2x 1800mm, plunger diameter: 275/150mm, length: 2650mm, width: 2400mm, height: 4850mm, weight: 18t, has received UVV, the press control is ...

Machine type: Abkantpresse
Manufacturer: Promecam
Type: 50x2
Condition: used/functional
"
}, {
"translation" : "** Offer will only be sent if a complete ...

Handspindelpresse - Typ "NEHER"

-Guter Gebrauchter Zustand


Abmaße:
LxBxH 1,4x1,2x2.3Meter
Gewicht 850Kg

Wckq0zxa

Details:
Presskraft: 250 t
Einbauhohe: 550 mm
Durchgang zwischen den Ständern: 2000 mm
Aufspanntischfläche: 2450x880 mm
Stößelabmessungen: 1990x700 ...

pressure 10 t
throat 235 mm
stroke ca. 400 mm
stroke speed - idle stroke downwards 4,5 m/min
stroke speed - idle stroke upwards 10 m/min
dayligth ca. 500/600 mm

Basisdaten:
Lagernummer: 25949
Kategorie: Sonstige Pressen
Fabrikat: NEFF
Typ: CHS 60
Baujahr: 1979
Steuerungsart: konventionell
Lagerort: Wiesbaden

Working length: 3050mm, pressing force: 2500kN, number of operational hours unknown, including set of tools and documentation, on-site inspection is possible.

Ref.Nr.: INNO26377

hardly used, very good condition, all cylinders are tight, press control type PSSAS

Technical data:
pressure: 50 t
working length: 2550 mm
distance between columns: 2050 ...

The machine is in good technical condition, not under power.

Details:
Presskraft: 160 t
Die Abmessungen des Desktop: 1500x1000 mm
Stößelhub: 700 mm
Einbauhohe: ...

Max. pressing force: 4000kN, max. stroke: 500mm, installation height: 1100mm, table dimensions: 1200x800mm, max. working pressure: 300bar, weight: 23t, with documentation, was maintained regularly, an ...

Pressing force: 300t, there are also straightening machines and coilers available, with documentation, worked until the end, an on-site inspection is possible.

Ref.Nr.: INNO26342

Nominal pressing force: 100t, an inspection is possible.

Ref.Nr.: INNO26341

Machine type: Kniehebelpresse
Manufacturer: Schmidt
Type: 14R-08-2007
Year of construction: 2007
Weight: approx. 23kg
Force max. 12KN
Condition: used/very ...

Catalog No. : 7047
Type: HSP 600 AZ-RN a
Producer: Brunnhuber
Made in: 1969
Characteristic:
Pressing force: 610 t

Catalog No. : 7246
Type: HCFP
Producer: Hidroliksan
Made in: 2022
Characteristic:
Pressing force: 100 t
Length of the table: 1400 mm
Width of the ...

The machine is functional, it can be retested.

Details:
Presskraft: 400 t
Die Abmessungen des Desktop: 1250x825 mm
Stößelabmessungen: 900x560 mm
Hubanzahl: 18 ...

pressure 25 t
throat 300 mm
stroke 400 mm
Number of working hours 1235 h
table-size 650 x 500 mm
ram surface 550 x 450 mm
dayligth 700 mm
rapid traverse - ...

pressure 060 t
stroke 350 mm
table surface area 750x344 mm
dayligth 197/750 mm
distance between columns 750 mm
diameter of piston 75 mm
The data for this ad was ...

Technische Daten PDM100R-5393
Leistung [Tm] 100
ABMESSUNGEN DER UNTEREN PLATTE [mm] 900x600
ABMESSUNGEN DER OBEREN PLATTE [mm] 850x550
FÜHRUNGSSÄULEN (x4) [Ø mm] 50

The machine is good condition, under power, possible to test it. Without lower ejector.

Details:
Presskraft: 160 t
Die Abmessungen des Desktop: 900x630 mm

Lagernummer:
1106-PR133

Maschinenart:
Exzenterpresse - Einständer

Fabrikat:
SCHULER

Typ:
PDr 40/220

Baujahr:

Lagernummer:
1106-PR115

Maschinenart:
Viersäulenpresse - Hydraulisch

Fabrikat:
SOM TEC

Typ:
VSF 1

Baujahr:

Lagernummer:
1106-PR167

Maschinenart:
Hydraulische Presse

Fabrikat:
WMW

Typ:
PYE 10/250

Baujahr:
1958

Press Design
drive system:  eccentric / crank
frame design:  C-frame, single sided
openings in uprights:  yes
number of slide actions:   ...

greatest distance between table and ram: 800mm

Tested under power, good technical condition.

Details:
Presskraft: 250 t
Die Abmessungen des Desktop: 900x630 mm

Press/punch with injection molding unit

200 ton punch upstroke press with injection molding machine (400to)
Additional guard locking via 4 power strokes
Manufacturer: R+S ...

Specifications:
Number of stations: 12 (11+1)
Capacity per ram: 6 tons
Maximum stroke: 114 mm
Max. shell height: 50 mm
Standard ram pitch: 82 mm
Blank diameter: 80 ...

Machine type: Hose press/pneumatically
Manufacturer: Peters
Type: NDP
Bj. 2000
Condition: used/good
"
}, {
"translation" : "** Offer will only be ...

pressure 63 t
throat 500 mm
stroke 150 mm
table surface area 1000 x 800 mm
ram surface 1000 x 800 mm
dayligth 400 mm
total power requirement kW
weight of the ...

Machine type: Eccentric Press
Manufacturer: AMBOLD
Type/Model: EVSP 35
Year of construction: 1970
Machine condition: very good
Offer type: used machine

Machine in good condition, can be tested anytime.

Details:
Presskraft: 25 t
Die Abmessungen des Desktop: 500 x 700 mm
Stößelabmessungen: 120 mm

Machine in very good condition, can be tested any time.

Details:
Presskraft: 160 t
Die Abmessungen des Desktop: 900x630 mm
Stößelabmessungen: 750x450 mm

Machine in very good condition, can be tested anytime.

Details:
Presskraft: 80 t
Die Abmessungen des Desktop: 400x500 mm
Hauptmotorleistung: 7 kW

Details
pressure:6 t
stroke:1020 mm
total power requirement:3,5 kW

Description
Including feedCan only adjust between tips

Details
pressure:6 t
stroke:1020 mm
total power requirement:3,5 kW

Description
Including feedCan only adjust between tips

Drive power 55 / 4 kW
Tracking travel 28 mm
Safety distance 155 mm
Tracking travel time 97 ms
Oil filling 1200 liters

Changes and errors in the technical details ...

Press force 2000kN, lifting speed: 10mm/s, max. operating pressure: 32MPa, weight: 400kg, with steel base frame, on-site inspection is possible.

Ref.Nr.: INNO26204

Machine in very good condition, under power, can be inspected any time.
It has 8+1 axles, grip pneumatic, 2 rows of original knives.

Details:
Druckleistung: 100 t

Table press, pneumatically operated
Manufacturer K & W Beyer O.H.G
Type Q10EL
Power at 6 Atü 10 mkg
Triggering the movement via electric valve

...

Eccentric press
Manufacturer KRS (Kurt Rompel Solingen)
Type EPV50,
YOC 66,
Printing capacity 50 t,
Plunger stroke 80 mm,
Weight approx. 2.500kg
...

Eccentric press
Manufacturer KRS (Kurt Rompel Solingen)
Type EPV15,
Bj 64,
Printing capacity 15 to
Plunger stroke 60 mm,
Weight approx. 1.000kg
...