Brukte maskiner: Maskiner for plastbehandling

Operational hours counter: 59,129h, with Handling PSA 2080.

Ref.Nr.: INNO26001

Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software.

Ref.Nr.: INNO25997

Weight: 9.1t, the machine is leaking and the control card is missing.

Ref.Nr.: INNO25980

Clamping force: 15 t
Year: 1999
Shot capacity: 14 (PS) g

Injection Unit: .../60
Screw diameter: 15 mm
Injection pressure: 2330 bar
Injection ...

Clamping force: 25 t
Year: 2006
Shot capacity: 20 g

Injection Unit: .../35
Screw diameter: 18 mm
Injection pressure: 2099 bar
Shot capacity: 20 g

Schließkraft: 25 t
Baujahr: 2018
Spritzgewicht in PS: 31 g

Spritzeinheit: .../275
Schneckendurchmesser: 22 mm
Spez. Spritzdruck: 2000 bar

Clamping force: 30 t
Year: 2003

Screw diameter: 18 mm
Injection pressure: 2500 bar
Clamping Unit: 300/...
Clamping force: 30 t
Distance between tie ...

Clamping force: 35 t
Year: 1999
Shot capacity: 17 (PS) g

Injection Unit: .../60
Screw diameter: 18 mm
Injection pressure: 2500 bar
Injection ...

Clamping force: 35 t
Year: 2006
Shot capacity: 30 g
Control: NC4

Injection Unit: .../80
Screw diameter: 22 mm
Injection pressure: 2061 bar

Clamping force: 50 t
Year: 1999
Shot capacity: 25 g

Injection Unit: .../60
Screw diameter: 22 mm
Injection pressure: 2320 bar
Injection volume: 30 ...

Clamping force: 50 t
Year: 2004
Shot capacity: 54 g
Control: NC4

Injection Unit: .../200
Screw diameter: 25 mm
Injection pressure: 2400 bar

Schließkraft: 50 t
Baujahr: 2001
Spritzgewicht in PS: 78 g

Spritzeinheit: .../120
Schneckendurchmesser: 30 mm
Spez. Spritzdruck: 1350 bar

Schließkraft: 60 t
Baujahr: 2003

Spritzeinheit: .../111
Schneckendurchmesser: 18/25 mm
Spez. Spritzdruck: 2230/2253 bar
Schließeinheit: 600/...

Clamping force: 60 t
Year: 2000

Injection Unit: .../111
Screw diameter: 25 mm
Clamping Unit: 600/...
Clamping force: 60 t
Distance between tie ...

Clamping force: 60 t
Year: 2002
Shot capacity: 30,4 g
Control: UNILOG B4

Screw diameter: 22 mm
Injection pressure: 1488 bar
Injection volume: 33,4 ...

Clamping force: 60 t
Year: 2006

Injection Unit: .../111
Screw diameter: 18/25 mm
Injection pressure: 2236/2253 bar
Clamping Unit: 600/...
Clamping ...

Clamping force: 70 t
Year: 05/2004
Shot capacity: 65 g

Injection Unit: .../100
Screw diameter: 30 mm
Injection pressure: 1390 bar
Injection ...

Clamping force: 75 t
Year: 2003

Screw diameter: 30 mm
Injection pressure: 2500 bar
Clamping Unit: 750/...
Clamping force: 75 t
Distance between tie ...

Clamping force: 85 t
Year: 2006

Screw diameter: 25/30 mm
Injection pressure: 2253/2289 bar
Clamping Unit: 850/...
Clamping force: 85 t
Distance ...

Clamping force: 120 t
Year: 2004
Shot capacity: 239 g

Injection Unit: .../500
Screw diameter: 40 mm
Injection pressure: 2019 bar
Injection volume: 251 ...

Clamping force: 120 t
Year: 2007
Shot capacity: 195 g

Screw diameter: 40 mm
Injection pressure: 1600 bar
Injection volume: 214 ccm
Shot capacity: 195 ...

Output: 50-300kg/h, operational hours counter: 10h, with edge trim extraction.

Ref.Nr.: INNO25952

Arburg
Typ: Arburg Freeformer 300-3X
Additive Fertigung komplexer Funktionsbauteile
Mit Hochtemperatur Option
Der neue große freeformer 300-3X verarbeitet im ARBURG ...

Eos Kunststoff-Laser-Sinter-System
Typ: EOSINT P 730
Die Maschine hat vor kurzem erst eine Wartung erhalten.
Sechs Monate Garantie nach Rücksprache möglich.
Eos ...

  Wittmann Battenfeld
Typ: SmartPower 210
Wittmann Battenfeld Spritzgussmaschine mit Steuerung UNILOG B8
Anlage wurde vom Hersteller WITTMANN BATTENFELD Deutschland GmbH im ...

Eos EOSINT Kunststoff Laser-Sinter-Systems
Hier bieten wir ein Eos EOSINT Kunststoff Laser-Sinter-Systems an.
Eos EOSINT Kunststoff Laser-Sinter-Systems P380
Folgende Dinge sind beim ...

Eos EOSINT Kunststoff Laser-Sinter-Systems
Hier bieten wir ein Eos EOSINT Kunststoff Laser-Sinter-Systems an.
Eos EOSINT Kunststoff Laser-Sinter-Systems P385
Folgende Dinge sind beim ...

Eos EOSINT
Hier bieten wir ein Eos EOSINT Kunststoff Laser-Sinter-System an.
Folgende Dinge sind beim EOS P380 System dabei
Bauraumbehälter
Pulverbehälter

Eos EOSINT
Hier bieten wir ein Eos EOSINT Kunststoff Laser-Sinter-System an.
Folgende Dinge sind beim EOS P380 System dabei
Bauraumbehälter
Pulverbehälter

Catalog No. : 7028
Type: 350 CD
Producer: Battenfeld
Made in: 1991
Characteristic:
Control system: UNILOG 4000
Clamping force: 350 kN
Screw ...

Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were ...

Inv. Num. : 7019
Type: KM 125-520C1
Produzent: Krauss Maffei
Erzeugt: 2004
Parametern:
Einschaltstunden: 4818 h
Spannkraft: 125 t

Catalog No. : 7012
Type: DS 6.5
Producer: Weber
Made in: 1987
Characteristic:
Hours on: 42.000 h
Screw diameter: 65 mm
Main motor output: 16 kW

Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction ...

Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction ...

Closing force: 1500kN, screw diameter: 60mm, stroke volume: 622cm³, opening stroke: 900mm, installation height: 300/600mm, weight: 7.6t, an inspection is possible.

Ref.Nr.: INNO25785

There are two identical injection moulding machines available, closing force: 1750kN, screw diameter: 70mm, stroke volume: 690cm³, opening stroke: 1000mm, installation height: 350mm, weight: 10.5t, ...

Closing force: 800kN, screw diameter: 30mm, shot weight: 19.1-63.6g, operational hours counter: 54,185h, with documentation, without accessories or spare parts, was maintained regularly, an inspection ...

Closing force: 180t, weight: 12.2t, operational hours counter: 24,492h, with Handling Sepro S 5.35, fence, conveyor and documentation, an inspection is possible.

Ref.Nr.: INNO25662

Hydraulic pressure: 210bar, weight: 3.1t.

Ref.Nr.: INNO25619

Hydraulic pressure: 210bar, weight: 3.7t.

Ref.Nr.: INNO25618

Closing force: 1550kN, distance between tie-bars: 500x500mm, plate dimensions: 750x750mm, tool opening path: 650mm.

Ref.Nr.: INNO25597

Screw diameter: 50mm, closing force: 150t, length: 2849mm, operational hours counter: 102,537h, mit Dokumentation und Handling Sepro, the hydraulic hoses were renewed in 2021.

Ref.Nr.: ...

injection moulding machine KRAUSS MAFFEI KM 300-1400 CX

warehouse no.: 503393
manufacturer: KRAUSS MAFFEI
type: KM 300-1400 CX
controller:
year of ...

Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t.

Ref.Nr.: INNO25565

Connected load: 42kW.

Ref.Nr.: INNO25564

Connected load: 40kVA.

Ref.Nr.: INNO25563

Hydraulic operating pressure: 275bar, weight: 4.1t.

Ref.Nr.: INNO25562

Closing force: 550kN, opening stroke: 400mm, mould height: 250-650mm, column distance: 360x335mm, max. ejector stroke: 80mm, table dimensions: 565x540mm, max. tool weight: 600kg, screw diameter: 38mm, ...

Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device.

Ref.Nr.: INNO25464